|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System125 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
150mm x 70mm Flat Ducting Pipe System 125
150mm x 70mm Flat Ducting Pipe 1 Metre
System 125 Flat ducting pipe is ideal for cooker hoods with motor speeds up to 750m³/hr. It is far better at extracting odours and vapours more efficiently that flexible aluminium pipe. We recommend this pipe for all ceiling extractors and all extractors with a minimum of 350m³/hr.
Using our patented air tight connectors ensures very high extraction without loss of suction and requires no ducting tape on the joint.
This pipe is part of our System150 range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
This is part number 4 from the chart below.
System 125 Ducting Quick Links
150mm x 70mm Flat Ducting Pipe 1 Metre System125
- Brand: Luxair Cooker Hoods Limited
- Product Code: 125-1M-PIPE-RECTANGULAR
- Ex Tax: £14.96