|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System100 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
100mm 90° Round Elbow
90° Round Elbow
This part is used for connecting two 100mm round ducting pipes to each other at a 90° bend ensuring smooth airflow is achieved through corners.
This product is self-seal push fit and requires no ducting tape on the joint.
It is ideal for wall mounted cooker hoods ducted to the outside wall directly behind the extractor fan.
This is part number 3a from the chart below.
This clip is part of our System100 range, commonly referred to as 4 inch ducting due to the round pipe being 100mm / 4" wide. This system includes both 100mm x 60mm rectangular ducting and 100mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
100mm Ducting Quick Links
100mm (4") 90° Round Elbow
- Brand: Luxair Cooker Hoods Limited
- Product Code: 100mm 90° Round Elbow
- Ex Tax: £8.29