75cm Vented Downdraft Induction Hob With Brushless Motor

75cm Vented Downdraft Induction Hob With Built In Energy Efficient Powerful Brushless Motor

Recirculated Using Venting Kit

Ducted Outside Using 150mm Ducting

Vented powerful Induction hob with built in extractor fan is a brand new concept in extraction. An efficient induction hob that has a powerful energy efficient 800 m3/hr brushless motor, more than enough power to remove steam and grease from 4 pans boiling at once.

The Arcus can be recirculated if you cant duct to the outside wall by using carbon filters with the re-circulation kit, available (separate purchase). These will be placed over the motor to capture grease/smells and then the air will be filtered back in to the room. 

Can be installed in a normal base unit 900mm wide x 600mm deep against the wall, so no need for a island unit if you dont have space. This kitchen extractor hob has been designed to work with pans as high as 220mm. Air is drawn through the two central vents as soon as the extractor is turned on. 
 
For convenience the hob and extractor can be used separately so if you only want to use the hob you can leave the extractor off, similarly if there are any odours or steam still in the air after you have finished cooking, you can use the extractor function only once the hob has been turned off. A timer function is available that will power down the motor when the timer counts to zero. 

Free 5 Years Parts & Labour Warranty (Subject to Registration within 90 Days of Installation)

This hob must be installed on minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent ducting is 220mm x 90mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor. Please view our Ducting Components before making a purchase so you know which components are in the various kits and to add any additional equipment you might need.