*Offer Ends Sunday 2nd April 11pm Due To Limited Stocks*
|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
220mm x 90mm Flat Tube Ducting Clip
Flat ducting pipe clips for 220mm x 90mm flat ducting lengths
Suitable for use where space is tight, such as under floorboards, above ceilings or behind cavity walls. Compliant with Part F of the Building Regulations. Suitable for commercial and domestic use.
This is a 2 x pack and includes the screws however we advise to check that fixings are suitable for the type of surface you are fixing to, this is part number 12 from the chart below.
This clip is part of our 6" Airtight range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
150mm (6") Airtight Kitchen Extractor Ducting Quick Link
220mm x 90mm (6") Flat Tube Ducting Clips (2 x per pack)
- Brand: Luxair Cooker Hoods Limited
- Product Code: 150-PIPE-BRACKETS-RECT
- Ex Tax: £7.46