|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
150mm (6") Kitchen Extractor Ducting Quick Link
220mm x 90mm Flat Pipe Ducting Connector
220mm x 90mm Flat Pipe Connector
This part is used for connecting two 220mm x 90mm flat ducting pipes to each other on a flat ducting run
These patented connectors are self-seal push fit leaving a secure air seal tight joint with no ducting tape required.
Please ensure that you use the flat ducting clips either side of the joints to ensure they do not sag on a long run of one or more pipes
This connector is part of our 6" Airtight range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
This is part number 8 from the quick link chart.
Pipe clips are number 12 from the chart.
220mm x 90mm (6") Flat Pipe Connector
- Brand: Luxair Cooker Hoods Limited
- Product Code: 150-CONNECTOR-RECTANGULAR
- Ex Tax: £5.79