|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System125 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
System 125 Ducting Quick Links
Flat Tube Ducting Clip 5"
Flat cooker hood ducting pipe clips
Suitable for use where space is tight, such as under floorboards, above ceilings or behind cavity walls. Compliant with Part F of the Building Regulations. Suitable for commercial and domestic use.
This is a 2 x pack and includes the screws however we advise to check that fixings are suitable for the type of surface you are fixing to, this is part number 12 from the chart below.
This clip is part of our 5 Inch Airtight range, commonly referred to as 5 inch ducting, due to the round pipe being 125mm / 5" wide. This system includes both 150mm x 70mm flat ducting and 125mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
150mm x 70mm (5") Flat Pipe Ducting Clips (2 x per pack)
- Brand: Luxair Cooker Hoods Limited
- Product Code: 125-PIPE-BRACKETS-RECT
- Ex Tax: £4.96