Previous

125mm Inline Ducting Silencer
Next product

150mm x 70mm (5") Flat Ducting Pipe 1 Metre

125mm 5" 90° Round Ducting Elbow

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System125 ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

System 125 Ducting Quick Links

Quick Links

Aluminium Ducting Tape

125mm 90° Round Elbow

90° Round Elbow

This part is used for connecting two 5" / 125mm round ducting pipes to each other at a 90° bend ensuring smooth airflow is achieved through corners.

Please note the 125-Semi-Rigid pipe is not part of the self-seal range and will not fit directly on to this bend.

This product is self-seal push fit and requires no ducting tape on the joint.

It is ideal for wall mounted cooker hoods ducted to the outside wall directly behind the extractor fan.

This elbow is part of our 5 Inch Push Fit range, commonly referred to as 5 inch ducting, due to the round pipe being 125mm / 5" wide. This system includes both 150mm x 70mm flat ducting and 125mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Round to Flat Adapter

Round to Flat Elbow

This is part number 3a from the ducting chart.