May Bank Holiday Offers Now On

100mm flat ducting pipe connector clips 2 x per pack

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System100 ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

Flat Tube Ducting Clip Sytem 100 - 4"

Flat ducting pipe clips

Suitable for use where space is tight, such as under floorboards, above ceilings or behind cavity walls. Compliant with Part F of the Building Regulations. Suitable for commercial and domestic use.

This is a 2 x pack and includes the screws however we advise to check that fixings are suitable for the type of surface you are fixing to.

This is part number 12 from the chart below.

This clip is part of our System100 range, commonly referred to as 4 inch ducting due to the round pipe being 100mm / 4" wide. This system includes both 100mm x 60mm rectangular ducting and 100mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Round to Flat Adapter

Round to Flat Elbow