|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
150mm 90° Round Elbow System 150
90° Round Elbow
This part is used for connecting two 150mm round ducting pipes to each other at a 90° bend ensuring smooth airflow is achieved through corners.
This product is self-seal push fit and requires no ducting tape on the joint.
It is ideal for wall mounted cooker hoods ducted to the outside wall directly behind the extractor fan.
This elbow is part of our System150 range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
This is part number 3A from the chart below.
150mm (6") Kitchen Extractor Ducting Quick Link
150mm 90° Round Elbow System150
- Brand: Luxair Cooker Hoods Limited
- Product Code: 150-BEND-ROUND
- Ex Tax: £14.96