150mm Round To Flat Horizontal Connector

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

150mm (6") Kitchen Extractor Ducting Quick Link

Quick Links

Aluminium Ducting Tape

150mm Round To 220mm x 90mm Horizontal Connector

150mm Round to 220mm x 90mm Flat Connector

This connector is used to connect a 220mm x 90mm flat ducting pipe to either 150mm round ducting pipe or the 150mm flexi aluminium tube. It can be used in either vertical or flat position.

This adapter has a push fit air tight seal and requires no ducting tape.

This adapter is part of our System150 range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Round to Flat Adapter

Round to Flat Elbow

This is part number 9 from the ducting chart.