Previous

220mm x 90mm (6") 45° Vertical Ducting Elbow

220mm x 90mm 6" Flat Tube Ducting Clip (2 x per pack)

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

150mm (6") Kitchen Extractor Ducting Quick Link

Quick Links

Aluminium Ducting Tape

220mm x 90mm Flat Tube Ducting Clip

Flat ducting pipe clips for 220mm x 90mm flat ducting lengths

Suitable for use where space is tight, such as under floorboards, above ceilings or behind cavity walls. Compliant with Part F of the Building Regulations. Suitable for commercial and domestic use.

This is a 2 x pack and includes the screws however we advise to check that fixings are suitable for the type of surface you are fixing to, this is part number 12 from the chart below.

This clip is part of our 6" Airtight range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Round to Flat Adapter

Round to Flat Elbow