|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System125 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
System 125 Ducting Quick Links
125mm Rectangular Flat Pipe Connector
125mm x 70mm Flat Pipe Connector
This part is used for connecting two 125mm x 70mm flat ducting pipes to each other on a flat ducting run
These patented connectors are self-seal push fit leaving a secure air seal tight joint with no ducting tape required.
Please ensure that you use the flat ducting clips either side of the joints to ensure they do not sag on a long run of one or more pipes
This pipe is part of our 5 Inch Airtight range, commonly referred to as 5 inch ducting, due to the round pipe being 125mm / 5" wide. This system includes both 150mm x 70mm flat ducting and 125mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
125mm (5") Rectangular Flat Pipe Connector
- Brand: Luxair Cooker Hoods Limited
- Product Code: 125-CONNECTOR-RECTANGULAR
- Ex Tax: £4.17