|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System100 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
100mm Ducting Quick Links
100mm Round To 100mm x 60mm Flat 90° Elbow
100mm Round to 100mm x 60mm Flat Elbow Connector
This connector is used to connect a 100mm x 60mm flat ducting pipe to either 100mm round ducting pipe or the 100mm flexi aluminium tube.
This part is a 90° bend ensuring smooth airflow is achieved through corners.
This clip is part of our System100 range, commonly referred to as 4 inch ducting due to the round pipe being 100mm / 4" wide. This system includes both 100mm x 60mm rectangular ducting and 100mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
This is part number 3 from the chart below.
100mm (4") Round To 100mm x 60mm Flat 90° Elbow
- Brand: Luxair Cooker Hoods Limited
- Product Code: 100mm Vertical Bend 90° Round To Rectangular
- Ex Tax: £5.79