220mm x 90mm (6") Flat PVC Flexi Ducting Hose - Luxair Cooker Hoods Limited
220mm x 90mm (6") Flat PVC Flexi Ducting Hose - Luxair Cooker Hoods Limited
220mm x 90mm (6") Flat PVC Flexi Ducting Hose - Luxair Cooker Hoods Limited
220mm x 90mm (6") Flat PVC Flexi Ducting Hose - Luxair Cooker Hoods Limited
220mm x 90mm (6") Flat PVC Flexi Ducting Hose - Luxair Cooker Hoods Limited

220mm x 90mm (6") Flat PVC Flexi Ducting Hose

  • Fire resistant - Mould resistant - Recyclable
New Stock Due Soon

  • In stock
  • Backordered, shipping soon
Regular price£24.95
Total for selected quantity
/
Ex VAT: £20.79
Prices Shown Are Including VAT. *
This service is not currently available for the postcode entered. Please contact us to check availability.
Other Recommended Ducting And Filter Options

Optional extras — you can buy the product on its own.

Add the components you need from the ducting range.

Browse components

Match the dimensions and connection type. Round and flat ducting may require an adaptor.

Already in your basket
  • Pyramid - 60cm to 110cm Wall Mounted Cooker Hood
    1 × Pyramid - 60cm to 110cm Wall Mounted Cooker Hood — Ivory-Cream / 60cm
Basket total£169.15

These items are already added. The main product quantity reflects your basket; component selections add extra items.

View cart
220mm x 90mm (6") Flat PVC Flexi Ducting Hose
£24.95

220mm × 90mm Flat Ducting Flexible Hose — Extends to 500mm

This flexible hose connects two 220mm × 90mm flat rectangular ducting sections and extends up to 500mm, bending at virtually any angle to route the duct run around obstacles or through tight spaces. It is part of the Luxair System150 6" push-fit airtight ducting range.

Where This Component Is Used

Use this flexible hose where rigid System150 components cannot be installed due to restricted access, irregular angles, or obstructions within the duct run — such as ceiling joists, pipes, beams, or cables in tight ceiling voids. It is particularly suited to ceiling cooker hood installations where the duct must navigate between joists or up and over structural obstacles where a fixed-angle rigid elbow would be impractical or physically impossible to fit.

Use Rigid Components Wherever Possible

Rigid flat duct sections and push-fit elbows should always be used wherever the installation allows. Flexible hose creates more airflow resistance than rigid ducting due to its non-smooth interior, which reduces extraction performance — particularly over longer flexible sections. Use this hose only where rigid components genuinely cannot be fitted, and keep the flexible section as short and straight as possible to minimise resistance in the duct run.

Ducting Size Guide

Selecting the correct ducting diameter for your motor output ensures maximum extraction performance:

  • Below 450m³/hr → 100mm (4") ducting
  • 450–750m³/hr → 125mm (5") or 150mm (6") ducting
  • 750–2,000m³/hr → 150mm (6") or 200mm (8") ducting

The System150 6" Ducting Range

This component is part of the Luxair System150 range — combining 220mm × 90mm flat rectangular ducting and 150mm round ducting, both carrying equivalent airflow rates and fully interchangeable within the system. The full range includes rigid straight pipe sections, elbows, connectors, adapters, and wall vents — use rigid components wherever possible and this flexible hose only where rigid components cannot be fitted.

✓ 220mm × 90mm flat ducting flexible hose — extends up to 500mm; bends at virtually any angle

✓ Connects two 220mm × 90mm flat ducting sections — at any required angle without a fixed-degree rigid elbow

✓ Ideal for ceiling hood installations — navigates between joists, around structural obstacles and through tight ceiling voids

✓ Use rigid components wherever possible — flexible hose creates more airflow resistance than rigid ducting; keep flexible section as short and straight as possible

✓ Part of the Luxair System150 6" push-fit airtight ducting range — use where rigid System150 components cannot be fitted

✓ Suitable for kitchen, bathroom, utility room and whole-house extract systems

✓ Fast UK despatch — express overnight service available

Choose your cooker hood with confidence

Drawing on 25 years of Luxair experience, our cooker hood buying guide helps you compare hood styles, plan your ventilation and choose the right extraction for your kitchen.

  • Compare ceiling, wall, island and built-in hoods, downdrafts and extractor hobs.
  • Understand ducted and recirculating options, external motors, filters and ducting.
  • Check sizing, extraction rates and noise levels before you buy.
  • Explore our site survey and installation services.

Always check this product’s specifications and installation manual for compatible options and fitting requirements.

Read the cooker hood buying guide

Automatic Airtight Wall Vent

Luxair Automatic Airtight Wall Vent 

125mm (5") and 150mm (6")

The Luxair Automatic Airtight Wall Vent seals shut automatically when your extractor fan is switched off, preventing warm air from escaping through the wall duct and cold air from entering. It operates entirely by air pressure when the extractor runs, the pressure opens the vent; when the extractor stops, low-maintenance springs return the vent to the sealed position. No electricity, no sensors, no maintenance beyond occasional cleaning.

Automatic Airtight Wall Vent Showcase

Recently viewed