*Offer Ends Sunday 2nd April 11pm Due To Limited Stocks*
|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System100 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
100mm x 60mm Rectangular Connector
100mm x 60mm Flat Pipe Connector
This part is used for connecting two 100mm x 60mm flat ducting pipes to each other on a flat ductung run
These patented connectors are self-seal push fit leaving a secure air seal tight joint with no ducting tape required.
Please ensure that you use the flat ducting clips either side of the joints to ensure they do not sag on a long run of one or more pipes
This is part number 8 from the ducting chart below.
This clip is part of our System100 range, commonly referred to as 4 inch ducting due to the round pipe being 100mm / 4" wide. This system includes both 100mm x 60mm rectangular ducting and 100mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
100mm Ducting Quick Links
100mm x 60mm (4") Rectangular Connector
- Brand: Luxair Cooker Hoods Limited
- Product Code: 100mm rectangular Flat Pipe connector
- Ex Tax: £4.96
Tags: 100mm, rectangular, Flat, Pipe, connector