Cooker Hood Aluminium Metal Grease Filters

Cooker Hood Aluminium metal grease filters fo kitchen extractor fans, you can purchase these directly from Luxair. Metal grease filters can be placed in your dishwasher upright as you would a plate! This will remove the built up grease and make them look like new again, please do not use abrasive cleaners on either your filters or cooker hoods. Using an abrasive cleaning product can tarnish the filters.

Over the years, sizes do change of the metal grease filters and we are only able to advise on the size used on the current models. To ensure you order to correct filters, please measure your current ones in MM and select the nearest size from the menu on the left-hand size. Please note, the images online are stock images and do not represent the actual filters themselves - always go by the size/measurements of the filters that are the closest to the filters you have, rather than the online image.

See Each Image For Exact Dimensions 

Metal Grease Filter 168mm x 228mm For Example

Did you know! 

If the back tabs don't match your tab holes exactly, you can simply push them flat with a screwdriver and cut new ones with a sharp Stanley knife, fold them out and fit to your cooker hood.  

Dishwasher Safe

All our mesh filters can be placed in your dishwasher, no need for expensive cleaning products to remove the grease! Please note, depending on the detergent used (specifically the PH Balance and Salt content) along with the temperature setting, this can cause discoloration of the filters, this is no way impacts the use.

Simply place the in the upright position like you would a plate, set the temperature to no more than 45 ° to 50 °  Max, anything above this will discolour the mesh filter. so take care not to exceed this temperature and avoid harsh detergents.

Alternatively, hand wash using warm soapy water!

When Your Replacement Filters Arrive!

They will have a blue protective film around the outer edge, this is just to protect the steel finish in transit and must be removed before installation.