Black Friday Offers Now On

125mm 90° horizontal elbow

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System125 ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

150mm x 70mm 90° Horizontal Elbow System 125

45° Vertical Elbow

This part is used for connecting two 150mm x 70mm flat ducting pipes to each other at a 45° bend ensuring smooth airflow is achieved through corners.

This patented push fit system requires no ducting tape and ensures a airtight seal between coupling.

This elbow is part of our System125 range, commonly referred to as 5 inch ducting, due to the round pipe being 125mm / 5" wide. This system includes both 150mm x 70mm flat ducting and 125mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Sys125 Round to Flat Adapter

Sys125 Round to Flat Elbow