78cm Downdraft Induction Hob with built in Extractor Fan 

The Most Powerful Downdraft Flexizone Induction Hob On The Market With Riser Unit

LOW STOCK ONLY A FEW REMAINING AT THIS PRICE

This top of the range Arcus flexi Induction hob with built in extractor fan is a brand new concept in extraction. An efficient induction hob that has a powerful 950 m3/hr motor, more than enough power to remove steam and grease from 4 pans boiling at once.

This kitchen extractor hob has been designed to work with pans as high as 220mm and can be installed in a normal base unit 900mm wide x 600mm deep. Air is drawn through the central vent that will rise as soon as the extractor is turned on. This central vent is mechanical and will rise and lower as the extractor is turned on and off.  
 
For convenience the hob and extractor can be used separately, so if you only want to use the hob you can leave the extractor off, similarly if there are any smells or steam still in the room after you have finished cooking, you can use the extractor once the hob has been turned off. A timer function is available that will power down the motor when the timer counts to zero. 
 
Induction hobs are excellent for cleaning and maintaining but also for safety and efficiency.
The Arcus features many safety features such as:

• Pan Detection
• Overflow device
• High Temperature Limit
• Auto Switch Off
• + many more features ( see technical tab for more details )

Please view our Ducting and Vents Section before making a purchase, to ensure you have all the equipment you will need to help you duct out correctly. This will help maximise performance and extraction levels and help to keep your kitchen fresh and odour free.

This hob must be installed on a minimum 6" / 150mm round ducting or rectangular equivalent. Our equivalent rectangular ducting is 220mm x 90mm. This will allow for the highest extraction rate possible for the hood and aid in reducing noise from the motor.