An extractor air solution and optimum heat protection are no contradiction - when you have a THERMOBOX! The idea of using air as an insulating medium, is as simple as it is ingenious. You can also retrofit this purely mechanical backpressure shutter solution.

It is commonly known that extracted air is better than recirculated air, but one shortcoming of many extractor air solutions is the wall conduct or wall vent – the component that guides the exhaust air through the house wall. Old or simple new models provide insufficient protection against heat loss and on cold or windy days, valuable heat energy is lost through this leak, especially when the cooker hood is not in use.

If your house is prone to windy conditions, then this unit will put an end to noisy flapping outside vents, thus also preventing the cold air returning back into your kitchen too laugh

The multi-award-winning THERMOBOX® from Luxair finally puts an end to this. Its operating principle is as simple as it is ingenious: the ShutterTec retention system consists of three flaps arranged one behind the other and sealed by a magnet. When closed, these form two chambers which trap the air and since air is a poor heat conductor, the THERMOBOX® insulates up to 20 times better than normal wall vents.

   

To be precise: the U-value is 2.2 W/m²K and is Blower-Door certified (required opening pressure >65 Pa). Even in strong wind nothing rattles, and cold outside air stays where it belongs - outside! laugh

The THERMOBOX® is available in a diameter of 125 or 150 millimetres and this clever award winning component can subsequently be installed in existing systems you may already have. This self-opening valve, will open and close when your extractor is turned on or off, this will save on any cold air returning back into your room.

No electrical connection is necessary and it simply fit into either a 125mm ducting pipe or 125mm semi rigid aluminium hose.

(please note that this product doesn't currently fit inside our own 125mm 1 mtr ducting pipe and a 125mm semi rigid length will be required to house this 125mm version).

Thermo box fits inside our rigid aluminium hose

Write a review

Please login or register to review

Thermobox - 125mm - Heat Retention Cartridge

  • £84.95
  • £63.95

  • Ex Tax: £53.29

Related Products

Aluminium Semi Rigid Flexible Ducting Hose

125mm Aluminium Semi Rigid Flexible Duct Hose

Aluminium Semi Rigid Flexible Duct Hose Single layer aluminium flexible duct with a 4mm corrugat..

Availability:

£12.95 Ex Tax: £10.79

Automatic Open & Close Heat Retention Wall Vent

Automatic Airtight Heat Retention Wall Vent - 150mm

150mm Automatic Airtight Wall Vent In todays world of energy-optimised construction or if you..

Availability:

£249.00 £329.00 Ex Tax: £207.50

Automatic Open & Close Heat Retention Wall Vent

Automatic Airtight Heat Retention Wall Vent - 125mm

125mm Automatic Airtight Wall Vent In todays world of energy-optimised construction or if you..

Availability:

£239.00 £319.00 Ex Tax: £199.17

Tags: thermobox, compair ducting, naber ducting, 125mm ducting, airtight vent, selfseal vents