Black Friday Offers Now On

150mm 90° Vertical Elbow

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

220mm x 90mm 90° Vertical Elbow System 150

220mm x 90mm 90° Vertical Elbow

This part is used for connecting two 220mm x 90mm flat ducting pipes to each other at a 90° vertical bend ensuring smooth airflow is achieved through corners.

This patented push fit system requires no ugly ducting tape and ensures a airtight seal between coupling.

This elbow is part of our System150 range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Sys150 Round to Flat Adapter

Sys150 Round to Flat Elbow

This is part number 7 from the quick link chart.