Black Friday Offers Now On

150mm Round Ducting Pipe

Downloadable Ducting Chart
PDF File - Opens in a New Window

Airtight Self-Seal Ducting

Please note most of our hoods have a motor exhaust of 150mm. We supply reducer collars should you need to use smaller ducting.

We highly recommend using the largest possible size ducting on every installation to maximise air flow.

Please check each product specification guide to determine what size duct you require.

150mm Round Ducting Pipe 1 Metre System 150

150mm Round Ducting Pipe 1m

150mm round ducting pipe is ideal for powerful cooker hoods with motor speeds up to 1200m³/hr. It is far better at extracting the odours and vapours more efficiently that flexible aluminium pipe.

Pipe ends are female and will accept male fittings such as bends and grilles.

Lengths of duct channel can be joined together using a male connector.

Using our patented air tight connectors ensures very high extraction without loss of suction and requires no ducting tape on the joint.

This pipe is part of our System150 range, commonly referred to as 6 inch ducting due to the round pipe being 150mm wide. This system includes both 220mm x 90mm flat ducting and 150mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:

Sys150 Round to Flat Adapter

Sys150 Round to Flat Elbow

It is ideal for wall mounted cooker hoods ducted to the outside wall directly behind the extractor fan.

This is part number 4a from the chart below.

Please note this pipe will not fit directly on to the motor of the extractor. You will require either semi rigid round or flexible pipe and a connector to connect directly to the motor.

- 1.5m Flexible Hose

- 1.5m Semi-Rigid Aluminium Hose

- Round to Round Connector