|Downloadable Ducting Chart
PDF File - Opens in a New Window
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System125 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
150mm x 70mm 90° Vertical bend Elbow System 125
150mm x 70mm 90° Vertical Elbow
This part is used for connecting two 150mm x 70mm flat ducting pipes to each other at a 90° vertical bend ensuring smooth airflow is achieved through corners.
The low-profile dimensions of the duct and fittings allows it to be easily concealed where space is restricted. It offers high airflow performance, making this system perfect for both whole house systems and single extract requirements such as Bathroom, Kitchen, and Utility Room extract systems
This patented push fit system requires no ugly ducting tape and ensures a airtight seal between coupling.
This elbow is part of our System125 range, commonly referred to as 5 inch ducting, due to the round pipe being 125mm / 5" wide. This system includes both 150mm x 70mm flat ducting and 125mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
This is part number 7 from the quick link chart
System 125 Ducting Quick Links
150mm x 70mm 90° Vertical Bend Elbow System125
- Brand: Luxair Cooker Hoods Limited
- Product Code: 125-BEND-RECT-VERTICAL
- Ex Tax: £5.79